CAME ATS Long 24V gate drive

translates to Polish ATS50DGS - Telescopic drive without encoder for swing gates with C Max. 200 mm with gate leaves up to 5 m wide and weighing 400 kg.

The basic set includes the following: actuators with housing, control center, frequency card (pre-installed), two hand-held transmitters, light barriers.

The XXL set also includes an LED warning light for increased safety, the warning light holder and an antenna to increase the remote control range from 30 m to approximately 150 m.

Protection rating (IP): 44

Tension
supply
Motor (V):
24 V

Power (W): 250

power consumption
(mA):
1

Warm-up time to 90° (sec.)	20
ED (%)	K/A
Operating cycles / Hour:	20
Closing force (N):	400 / 3000
operational temperature (°C):	-20 to +55

Almost plus: The electric gate drive is suitable for yard gates that are attached to walls or concrete pillars (for yard gates without metal posts).

AXI20: Universal all-round drive suitable for all gate models up to a passage width of 4000 mm. Requires 230V mains power, operates on 24V.

AXI25: Universal all-round drive suitable for all gate models up to a passage width of 5000 mm. Requires 230V mains power, operates on 24V.

ATS24V: High-quality gate operator for driveway gates. Suitable for mounting on metal posts and also on masonry pillars (200 mm wall depth). Requires 230V mains power, operates on 24V. Recommended for gates with opening widths of 4000-6000 mm.

ATS230V: High-quality gate operator for driveway gates. Suitable for mounting on metal posts and also on masonry pillars (200 mm wall depth). Heavy-duty version of the ATS series. Recommended for gates with opening widths of 4000-6000 mm.

AXO24V: CAME's most powerful swing gate operators, suitable for swing gates with metal posts and passage widths up to 6000 mm. Requires 230V mains power, operates on 24V.

AXO230V: CAME's most powerful swing gate operators, suitable for swing gates with metal posts and passage widths up to 6000 mm. Integrated mechanical limiters.

Came-Amico: Gate operators ideal for small gate leaves up to 1800 mm wide. The operator is therefore compatible with gates with a narrow opening width of up to 3600 mm – between metal posts.