Sliding gate LUZERN slim

Cantilever sliding gate / Complete set / The price includes all accessories

Cantilevered aluminum sliding gates with horizontal slats - individually customizable.

Design your high-quality aluminum sliding gate with a contemporary look. LUZERN slim aluminum sliding gates feature robust 100x100 mm aluminum posts, generously sized roller carriages, a 90/100 mm track, and frame thicknesses of at least 80x50 mm. Thanks to high-quality ball bearings, the sliding gate opens effortlessly, even manually.

The LUZERN slim sliding gate is compatible with all common standard gate operators. If you add an electric gate operator to your order (see Gate Operators), your sliding gate will be delivered with a pre-assembled rack and pinion. It can be operated manually or electrically. Retrofitting with an electric gate operator is also possible.

The LUZERN slim cantilever sliding gate is corrosion-resistant and maintenance-free - you receive a 20-year manufacturer's warranty.

Height:	600-2000 mm [Height]
Clearance:	2000-6000 mm [between the pillars]
Counterweight:	~40% of the light range / min. 1500 mm
Goal field filling:	LUZERN slim, 40/20 mm Aluminum profiles
Profile spacing:	30 mm (variable)
Gate frame:	circumferential 80/50 mm Frame

Coating:	Structured Powder coating
Surface:	fine structure
Color:	RAL 7016 Anthracite / or desired color
Material:	Aluminum hollow profiles
Profile position:	horizontal

Post type:	Aluminum columns / on request without
Guideposts:	100x100 mm aluminum posts
Locking posts:	100x100 mm aluminum posts
Post type 1:	for embedding in concrete (+ approx. 800 mm)
Post type 2:	for bolting down with 200x200 mm Footplates
Standard- Ground clearance:	80 mm
Goal without a post:	Accessories for masonry including

Preparation

Electric drive:

Yes, ready to use

Hook lock:

with manual

Gates without a motor

Opening-

direction:

from the outside

left / right

Special

Requirements:

if desired

Notification at

Order

Accessory 1:

All screws

made of stainless steel

Accessories 2:

Running rail 119/122 mm

factory ready pre-installed

Accessories 3:

Roller blocks, auxiliary rollers,

ramp

Accesories-

Mounting:

self-cutting

Screws, galvanized

Standard color: RAL 7016 Anthracite

Desired color: any color from the RAL palette

Select “Standard color” for the current trend color RAL 7016 Anthracite .

Select "desired color" for different colors.

After receiving your order, we will contact you to confirm the RAL color code. Alternatively, you can add a "shopping cart note" (in the shopping cart before clicking "checkout") and let us know your desired RAL color code. Here is an overview of the RAL colors:

https://www.ralfarbpalette.de/

We always offer a fine texture as standard. Textured powder-coated surfaces are robust against mechanical damage, dirt-repellent, and are among the current trends. The fine texture has a slightly matte finish. We can also offer a glossy finish upon request. Simply add a short note to your shopping cart or send us an email with your order.

In any case, you will receive an order confirmation from us, summarizing the details of your order. You can still make changes to your order immediately after receiving the order confirmation.
Select the desired sliding gate height. Then enter the "exact height". The exact height is the body height of the sliding gate – from the bottom edge of the frame to the top edge of the frame.

Please allow for a ground clearance of approximately 80 mm (standard 80 mm). If you select a gate height of H = 1800 mm, the sliding gate will have a total height of approximately 1880 mm above the ground (1800 mm gate height + 80 mm ground clearance).

The ground clearance on the roller supports can be adjusted between 80 and 200 mm. However, if the ground clearance is to be less than 80 mm, the roller supports would have to be embedded deeper into the foundation.

After receiving your order, you will receive a drawing that can be adjusted before the order is accepted.
Select the "electric" operating mode if you want your sliding gate to be factory-prepared for automatic operation.

If your building does not already have an electric gate opener, you can add a suitable automatic gate opener to your sliding gate here: www.zaun-kauf.ch/schiebetor-e-antrieb

When ordering an electric sliding gate with a gate drive set from ZAUN-KAUF.CH, the rack and pinion on the guide rail is also pre-installed at the factory (easier installation).

All electric gate drives offered are compatible with our driveway gates.
In any case, we will contact you after your purchase to confirm the opening direction (via email, or by phone if you prefer). The opening direction will then be confirmed in a separate email. Alternatively, you can specify the opening direction of the sliding gate by email or in the shopping cart notes.

The following opening directions are possible:

1: Viewed from the outside, the sliding gate opens to the LEFT.

2: Viewed from the outside, the sliding gate opens to the RIGHT.
The price of the sliding gate includes a gap of approximately 30 mm between the slats. After receiving your order, we will send you a customized drawing – modifications are possible. Adjusting the profile spacing from 30 to 100 mm is free of charge.

Should you require a custom spacing between the profiles, simply enter a "shopping cart note" as a guide to your order in your "shopping cart summary" (before clicking "checkout"). We will process the note after receiving your order.