Bern smart gate

BERN smart gate - Robust aluminum gate

The single-wing gate BERN smart impresses with a mix of small and large struts.

Design your new entrance gate with an impressive look. Choose between hinges for masonry or matching 80x80 mm / 100x100 mm gate posts. Configure the perfect handle set with or without a buzzer (electric opener). Hinge and strike plates are included, which not only enhance the aesthetics but also conceal the hinges and strike plate gap.

The BERN smart garden gate is rust-free, maintenance-free and extremely robust - you also benefit from a 20-year manufacturer's warranty.

Height:	600-2000 mm [Height]
Clearance:	800-1500 mm [between the pillars]
Goal field filling:	Aluminum garden gate BERN smart
Filling profiles:	200x20 mm / 20x20 mm
Profile position:	horizontal
Profile spacing:	30 mm (variable)
Gate frame:	circumferential 80/50 mm Frame

Coating:	Structured Powder coating
Surface:	fine structure
Color:	RAL 7016 Anthracite / or desired color
Material:	Aluminum hollow profiles
Filling:	mixed aluminum profiles
Accesories:	All screws made of stainless steel
Hinge- Mounting:	self-cutting Screws, galvanized

Post type:

aluminum columns

Goalposts:

without / 80x80 mm /

100x100 mm

Post type 1:

for embedding in concrete

(+ approx. 600 mm)

Post type 2:

for bolting down

with 200x200 mm

Footplates

Standard-

Ground clearance:

at posts

embedding in concrete

adjustable

Footplates

Ground clearance:

40-80 mm (special option)

(up to 120 mm possible)

Fittings 1:	Lever handle set, knob-like handle
Fittings 2:	Lever handle set, knob-like handle and summer
Fittings 3:	Stainless steel 80 cm Handle with buzzer
Fittings information:	with each option brushed stainless steel
Profile cylinder:	30/40 or 35/40 interchangeable

Hinges:

Stainless steel bolts, 90°

Deception:

hinge and

Stop plate

Opening-

direction:

will be after

Purchase coordinated

Special

Requirements:

if desired

notification according to

Order

Standard color: RAL 7016 Anthracite

Desired color: any color from the RAL palette

Select “Standard color” for the current trend color RAL 7016 Anthracite .

Select "desired color" for different colors.

After receiving your order, we will contact you to confirm the RAL color code. Alternatively, you can add a "shopping cart note" (in the shopping cart before clicking "checkout") and let us know your desired RAL color code. Here is an overview of the RAL colors:

https://www.ralfarbpalette.de/

We always offer a fine texture as standard. Textured powder-coated surfaces are robust against mechanical damage, dirt-repellent, and are among the current trends. The fine texture has a slightly matte finish. We can also offer a glossy finish upon request. Simply add a short note to your shopping cart or send us an email with your order.

In any case, you will receive an order confirmation from us, summarizing the details of your order. You can still make changes to your order immediately after receiving the order confirmation.
The width of the garden gate refers to the clear opening between the posts (see technical drawing in the product photos).

First, select the width category and then enter the exact width.

Example calculation for a garden gate in existing masonry

You measure a clear span of 1000 mm between your masonry columns. This clear span (1000 mm) is the order dimension. Your gate system measures 1000 mm – gate leaf including strike plate and hinges.

Example calculation for a garden gate with 100x100 mm gate posts

If you select a gate width of 1000 mm, the total width including two 100x100 mm gate posts is 1200 mm. See the technical drawing in the product photos.
Select the desired height for your garden gate. Then enter the "exact height". The exact height is the height of the garden gate itself – from the bottom edge of the frame to the top edge.

Please allow for a ground clearance of approximately 60 mm (standard 40-80 mm). If you select a gate height of H = 1800 mm, the garden gate will have a total height of approximately 1860 mm (1800 mm gate height + 60 mm ground clearance).

For posts intended for setting in concrete, you determine the ground clearance by the setting depth of the gate posts. For gate posts intended for surface mounting (with base plates), the standard ground clearance is 60 mm. We can adjust the ground clearance upon request after you place your order (please let us know).

After receiving your order, you will receive a drawing that can be adjusted before the order is accepted.
In any case, we will contact you after your purchase to confirm the opening direction (via email or phone if you prefer). The opening direction will then be confirmed in a separate email. Alternatively, you can inform us of the opening direction for your garden gate via email or in the shopping cart notes.

The following opening directions are possible:

A1: The gate opens inwards. Viewed from the outside, the hinges are on the right.

A2: The gate opens inwards. Viewed from the outside, the hinges are on the left.

B1: The gate opens outwards. Viewed from the outside, the hinges are on the right.

B2: The gate opens outwards. Viewed from the outside, the hinges are on the left.

(You will receive a detailed drawing after we receive your order.)
The gate price includes a spacing of approximately 30 mm between the slats. After receiving your order, we will send you a customized drawing – individual modifications are possible. Adjusting the profile spacing from 30 to 100 mm is free of charge.

Should you require a custom spacing between the profiles, simply enter a "shopping cart note" as a guide to your order in your "shopping cart summary" (before clicking "checkout"). We will process the note after receiving your order.