100x100 mm fence post with side base plates (right)

Fence posts made of 100x100 mm square tubing with factory-installed base plates, suitable for anchoring or bolting. The base plates are positioned laterally at the edge to allow for close installation against boundaries, edges, or buildings. They are also equipped with frost-resistant post caps.

Designation:	Fence posts / aluminum posts / Aluminum columns
Post dimensions:	100x100 mm
Post length:	460-2060 mm (including base plate)
Wall thickness:	3 mm / 4 mm

Designation:	Base plates / floor plates / Post bases
Base plate dimensions:	200x200 mm
Wall thickness:	8 mm
Base plate type:	Factory pre-installed
Base plate type:	side footplate / Initial footplate

Color:	RAL 7016 Anthracite / or desired color
Coating:	Structured Powder coating
Surface:	fine structure
Material:	Aluminum hollow profiles
Post caps:	System caps frost-resistant
Ground anchors:	included in the scope of delivery not included
Use:	for bolting down, for screwing

Standard color: RAL 7016 Anthracite

Desired color: any color from the RAL palette

Select “Standard color” for the current trend color RAL 7016 Anthracite .

Select "desired color" for different colors.

After receiving your order, we will contact you to confirm the RAL color code. Alternatively, you can add a "shopping cart note" (in the shopping cart before clicking "checkout") and let us know your desired RAL color code. Here is an overview of the RAL colors:

https://www.ralfarbpalette.de/

We always offer a fine texture as standard. Textured powder-coated surfaces are robust against mechanical damage, dirt-repellent, and are among the current trends. The fine texture has a slightly matte finish. We can also offer a glossy finish upon request. Simply add a short note to your shopping cart or send us an email with your order.

In any case, you will receive an order confirmation from us, summarizing the details of your order. You can still make changes to your order immediately after receiving the order confirmation.

Fence posts for bolting down / screwing down should be approximately 60 mm higher than the fence panel height – depending on the slope and installation situation.

The following post lengths are suitable for the following fence panel heights:

Post length

460 mm

for fence panels

400 mm

Post length

560 mm

for fence panels

500 mm

Post length

1060 mm

for fence panels